Motorola ENTERPRISE DIGITAL ASSISTANT MC70 - Manual (Page 82)

4 - 16 MC70 Integrator Guide
• The designated package(s) are downloaded from the FTP server.
AirBEAM Smart
The AirBEAM Smart product allows specially designed software packages to be transferred between a host
server and Symbol wireless handheld devices. Before transfer, AirBEAM Smart checks and compares
package versions, so that only updated packages are loaded.
AirBEAM Smart resides on radio-equipped client devices and allows them to request, download, and install
software, as well as to upload files and status data. A single communications session performs both file
download and upload. The ability to transfer software over a radio network can greatly reduce the logistical
efforts of client software management.
In an AirBEAM Smart system, a network-accessible host server acts as the storage point for the software
transfer. The AirBEAM Smart Client uses the industry standard FTP or TFTP file transfer protocols to check the
host system for updates and, if necessary, to transfer updated software.
AirBEAM Package Builder
In a typical distributed AirBEAM system, software to be transferred is organized into packages. In general, an
AirBEAM package is a set of files that are assigned attributes both as an entire package and as individual
component files. The package is assigned a version number and the transfer occurs when an updated version
is available.
An AirBEAM package can optionally contain developer-specified logic to be used to install the package.
Installation logic is typically used to update client device flash images or radio firmware. Examples of common
AirBEAM packages would include packages for custom client application software, radio firmware, and
AirBEAM Smart Client software.
Once these packages are built, they are installed on the host server for retrieval by the handheld device. Use
the AirBEAM Package Builder utility to define, generate, and install AirBEAM packages to a server. The
packages are then loaded from the server onto a client device equipped with an AirBEAM Smart Client
executable.
For instructions on how to define, generate, and install AirBEAM packages to the server, refer to the AirBEAM
Package Builder Product Reference Guide, p/n 72-55769-xx.
NOTE For more information about AirBEAM Smart, refer to the AirBEAM
®
Smart Windows
®
CE Client Product
Reference Guide (p/n 72-63060-xx).