Motorola ENTERPRISE DIGITAL ASSISTANT MC70 User Manual
Page 81
Application Deployment for Mobile 5.0 4 - 15
Figure 4-4
Rapid Deployment Window
3.
Scan the appropriate bar code(s) to complete the configuration and/or download.
a.
A PDF417 bar code (2-D bar code) can contain all download data in a single bar code. In this case,
only one bar code may be required to scan.
b.
Multi-part linear bar codes (1-D bar codes) can require scanning several bar codes. Scan these bar
codes in any order. The text box under Bar codes left to scan... shows the remaining bar codes to scan
(see
).
4.
After successfully scanning all appropriate bar codes, the EDA connects to the server and the Rapid
Deployment Configuring window displays while network settings are configured.
Figure 4-5
Rapid Deployment Window - Configuring
When configuration is complete:
•
The Today screen displays.
•
A new Wireless profile is created on the EDA from the data encoded in the scanned bar code(s). See
Chapter 7, Wireless Applications
for more information about wireless profiles.
Ready to Scan
No Bar Codes Left to Scan
Ready to Scan
Bar Codes Left to Scan are Listed
NOTE
If the
EDA
cannot connect to the server, it continues to retry until you cancel (exit) the application. If
failure to connect to the server persists, see the MSP Administrator.