Cdma settings, Phone, Cdma settings -8 – Motorola ENTERPRISE DIGITAL ASSISTANT MC70 User Manual
Page 116: Phone -8
6 - 8
MC70 Integrator Guide
CDMA Settings
Use the
Phone Settings
window to customize CDMA phone settings, such as the ring type and ring tone for
incoming calls and other options depending on the type of service.
Phone
Use the
Phone
tab to customize ring type, ring tone and keypad tone when entering phone numbers.
1.
Tap
Start
>
Settings
>
Personal
tab >
Phone
icon >
Phone
tab.
or
Start
>
Phone
>
Menu
>
Options
>
Phone
tab.
Figure 6-12
Phone Window - Phone Tab
2.
Phone and voicemail phone numbers automatically display when phone service is activated.
3.
Select a ring type from the
Ring type:
drop-down list. The ring type changes the way the MC7095 rings to
notify the user of an incoming call. Regardless of the ring type selected, a dialog box appears on the
display for incoming calls.
4.
Select a ring tone for incoming calls from the
Ring tone:
drop-down list. To hear a sample of the selected
ring tone, tap
. Tap
to end the ring tone.
5.
Select a keypad tone from the
Keypad:
drop-down list. This selection determines the tone that sounds
when entering a phone number on the keypad.
a.
Select
Short Tones
for a tone that sounds only for one or two seconds.
b.
Select
Long Tones
for a continuous sound for as long as the number on the keypad is pressed.
c.
Select
Off
to disable tones.
6.
Tap
Other Settings...
to set additional sounds and notifications for the MC7095.
7.
Select the
Notify me when voice privacy is unavailable
check box to receive a message when dialing.
NOTE
To use custom .wav, .mid or .wma files as ring tones, use ActiveSync on the host PC to copy the file to the
/Windows/Rings folder on the MC7095. Then, select the sound from the ring tone list.