Magnetic stripe reader (msr), Attaching and removing the msr, Magnetic stripe reader (msr) -23 – Motorola ENTERPRISE DIGITAL ASSISTANT MC70 User Manual
Page 53: Attaching and removing the msr -23, Table 2-7
Accessories2 - 23
Magnetic Stripe Reader (MSR)
This section describes how to set up and use the snap-on MSR with the EDA. The MSR snaps on to the
bottom of the EDA and removes easily when not in use.
When attached to the EDA, the MSR allows the EDA to capture data from magnetic stripe cards. To download
MSR data capture software, visit
Attaching and Removing the MSR
To attach, slide the MSR onto the bottom of the EDA and snap it in place.
Figure 2-27
MSR Installation
To remove the MSR open the arms and pull the MSR from the EDA.
Table 2-7
Spare Battery LED Charging Indicators
LED
Indication
Off
No spare battery in slot; spare battery not placed correctly;
cradle is not powered.
Fast Blinking Amber
Error in charging; check placement of spare battery.
Slow Blinking Amber
Spare battery is charging.
Solid Amber
Charging complete.
Card Reader Slot