Motorola ENTERPRISE DIGITAL ASSISTANT MC70 - Manual (Page 134)

7 - 10 MC70 Integrator Guide
User Certificate Installation
To install a user certificate (EAP TLS only) and a server certificate for EAP TLS and PEAP authentication:
1. Tap Install Certificate . The Credentials dialog box appears.
Figure 7-11 Credentials Dialog Box
2. Enter the User: , Pwd: (password), and Server: information in their respective text boxes.
3. Tap Retrieve . A Progress dialog indicates the status of the certificate retrieval.
4. Tap ok to exit.
After the installation completes, the Installed User Certs dialog box displays and the certificate is available in the
drop-down box for selection.
Server Certificate Selection
If you select the Validate Server Certificate check box, a server certificate is required. Select a certificate on the
Installed Server Certificates dialog box. An hour glass may appear as the wizard populates the existing
certificate list. If the required certificate is not listed, install it:
1. Tap the Install Certificate button.
Figure 7-12 Installed Server Certificates Dialog Box
A dialog box appears that lists the currently loaded certificate files found in the default directory with the default
extension.
NOTE To successfully install a user certificate, the EDA must already be connected to a network from which the
server is accessible.