FUJITSU DESKPOWER 5000 - Manual (Page 97)

87
5
Correcting errors
○ ○ ○ ○ ○ ○ ○ ○ ○
If an error message is displayed, respond as follows.
- Running the BIOS setup utility
If a BIOS setup error message is displayed, retry the BIOS setup utility.
- Confirming that built-in options are mounted correctly
If optional extension cards are mounted, confirm that the cards are mounted and set up
correctly. Also conform that the card is properly set. If available, consult manuals or utility
software with extension cards.
If the error message is still displayed, the PC may be faulty. Contact the Fujitsu service center
or a dealer.
Error Message
An error occurred when the
memory speed was unclear.
An error occurred when a
memory is inappropriate for the
system bus clock.
Description and necessary action
When the system bus clock is 100MHz, a memory
whose speed is unclear is mounted. Power off the
system, and then replace the memory with one
appropriate for the system bus clock.
The mounted memory is 66MHz and inappropriate for
the system bus clock. Power off the system, then
replace the memory with one appropriate for the
system bus clock.
12-Chap5(84-90) 25/4/00, 10:37 am 87