FUJITSU DESKPOWER 5000 - Manual (Page 51)

41
3
11
Attach the front panel.
Remove the blank panel for a 3.5-inch
expansion bay from the rear side of the front
panel as required in the arrow direction
shown in the figure.
12
Attach the upper cover.
13
Use BIOS setup to configure the internal
option.
To configure the installed IDE-standard
internal option, use the main menu of BIOS
setup ( see Section 2, "Main Menu," in
Chapter 4, "BIOS Setup").
Point
To remove the internal option, reverse the above-cited procedure.
Rear of
the panel
3.5-inch blank panel
Hook
Bend the
hook inward.
08-Chap3(34-44) 25/4/00, 10:36 am 41