FUJITSU DESKPOWER 5000 - Manual (Page 92)

82
● Save Changes
This item saves changes to the CMOS RAM. Press the Enter key to display the message
shown below. Select [Yes] and press the Enter key.
Setup Confirmation
Save configuration changes now?
[ Yes ] [No]
● Load Setup Defaults
This item loads default values to all setup items. Press the Enter key to display the message
shown below. Select [Yes] and press the Enter key.
For Windows NT model, specify [No] for [Plug & Play OS] in the Detail Menu, and specify
[Customized] for [Power Savings] in the Power Menu.
● Discard Changes
This item loads values before change from the CMOS RAM to all setup items and discards all
changes. Press the Enter key to display the message shown below. Select [Yes] and press
the Enter key.
Setup Confirmation
Load previous configuration now?
[ Yes ] [No]
Setup Confirmation
Load default configuration now?
[ Yes ] [No]
● Exit Discarding Changes
This item exits the BIOS setup utility without saving changes to the CMOS RAM and reboots the
computer. All changes are discarded. If the Enter key is pressed while changing setup values,
the message shown below is displayed. To discard changes, select [No] and press the Enter
key.
Setup Confirmation
Configuration has not been saved!
Save before exiting?
[ Yes ] [No]
10-Chap4(63-82) 25/4/00, 10:37 am 82