FUJITSU DESKPOWER 5000 - Manual (Page 36)

26
Installing Expansion
Cards
This section explains how to install expansion cards, which extend the range of the features of
your PC.
ISA bus
PCI bus
Point
- To install an expansion card, set up the PC, turn off the power, and install the expansion
card.
- The first and second black slots from the top are for ISA cards. The third and fourth white
slots from the top are for PCI cards.
- Only a half-size expansion card can be installed in the first slot from the top.
- When an expansion card using a serial port such as a modem card is installed, change the
duplicated serial port to "Not used" in the BIOS setup ( see "Setting the serial/parallel
ports" in Section 3, "Detail Menu," in Chapter 4, "BIOS Setup").
WARNING
● To prevent electric shock, before installing and removing expansion cards,
turn off the PC and connected units and unplug power cords from
respective outlets.
● To prevent electric shock, fire, and/or malfunction, install only Fujitsu
brand expansion cards in the PC.
CAUTION
● To prevent injury, when installing and removing expansion cards, remove
screws only from specified locations.
Electric shock
Injury
08-Chap3(20-33) 25/4/00, 10:36 am 26