FUJITSU DESKPOWER 5000 - Manual (Page 67)

57
4
– Numlock
This item sets whether the keyboard tenkey pad is set to Numlock mode at boot or reboot. In
Numlock mode, the user can enter numeric values from the tenkey pad.
- On (Initiail value)
The keyboard is set to Numlock mode.
- Off
The keyboard is not set to Numlock mode.
Point
In some OSs, this has to be set on the OS side.
– PS/2 Mouse
This item enables the PS/2 mouse controller.
- Disabled
The PS/2 mouse controller is disabled and resources are freed.
- Enabled
The PS/2 mouse controller is enabled.
Point
- When 'PS/2 Mouse' is [Disabled], the PS/2 mouse cannot be seen by the Device Manager of
Windows 95/98 (APM mode) and Windows 2000. On Windows 98 (ACPI mode) and
Windows 2000, An exclamation mark (!) is added to [PS/2 Compatible Mouse Port].
– USB Legacy Emulation
This item set whether the USB keyboard and mouse are usable on OSs not
supporting USB, such as Windows NT.
- Disabled
The USB keyboard and mouse cannot be used on OSs not supporting USB.
- Auto (initial value)
If the PC is booted with either a USB keyboard or mouse connected, the USB
keyboard and mouse can be used on operating systems that do not support USB.
- Enabled
The USB keyboard and mouse can be used on OSs not supporting USB.
Point
When USB keyboard and mouse are used with an OS that does not support USB, such as
Windows NT 4.0, this PC may not operate at full performance. In this case, use PS/2
keyboard by specifying [Disabled] to “USB keyboard/mouse.
10-Chap4(46-62) 25/4/00, 10:37 am 57