FUJITSU DESKPOWER 5000 - Manual (Page 77)

67
4
5
Press the Enter key to complete the password setup.
If the reentered password is incorrect, a Warning! window appears. Press the Enter key to
retry from Step 2.
To cancel password setup, press the Esc key.
Point
If the user starts setup operation by entering only a user password for a PC that requires the
input of both supervisor and user passwords, the setup items will be limited.
6
Select 'Exit Save Changes' on the Exit menu and press the Enter key.
The Setup Confirmation window then appears.
7
Select 'Yes' and press the Enter key.
The settings are saved.
8
Press the Power switch to turn off the power.
Point
Turn off the power while 'BIOS Setup' is displayed. If the power is turned off after BIOS Setup
has ended, password settings are invalid.
9
Set the jumper switch of the personal computer.
Change jumper switch JP5 from 2-3 to 1-2 on the computer. (For the location of jumper switch
JP5, see the following page.)
WARNING
● To prevent electric shock, before changing jumper switches, turn off the
computer main and peripheral units and unplug the power cable.
CAUTION
● The PC is very hot immediately after being turned off. Wait about ten
minutes and reboot.
Electric shock
Injury
10-Chap4(63-82) 25/4/00, 10:37 am 67