FUJITSU Semiconductor Controller MB89950/950A - Manual (Page 5)

i
PREFACE
■ Objectives and Intended Reader
The MB89950/950A series has been developed as a general-purpose version of the F
2
MC-8L family
consisting of proprietary 8-bit, single-chip microcontrollers. The MB89950/950A series is applicable to a
wide range of applications from consumer products to industrial equipment, including portable devices.
This manual describes the functions and operation of the MB89950/950A series and is aimed at engineers
using the MB89950/950A series of microcontrollers to develop actual products. See the F
2
MC-8L MB89600
Series Programming Manual for details on the MB89950/950A instruction set.
■ Trademarks
F
2
MC is the abbreviation of FUJITSU Flexible Microcontroller.
Other system and product names in this manual are trademarks of respective companies or organizations.
The symbols
TM
and ® are sometimes omitted in this manual.
■ Structure of This Manual
This manual contains the following 12 chapters:
CHAPTER 1 "OVERVIEW"
This chapter describes the main features and basic specifications of the MB89950/950A series.
CHAPTER 2 "HANDLING DEVICE"
This chapter describes points to note when using the general-purpose single-chip microcontroller.
CHAPTER 3 "CPU"
This chapter describes the functions and operation of the CPU.
CHAPTER 4 "I/O PORTS"
This chapter describes the functions and operation of the I/O ports.
CHAPTER 5 "TIMEBASE TIMER"
This chapter describes the functions and operation of the timebase timer.
CHAPTER 6 "WATCHDOG TIMER"
This chapter describes the functions and operation of the watchdog timer.
CHAPTER 7 "8-BIT PWM TIMER"
This chapter describes the functions and operation of the 8-bit PWM timer.
CHAPTER 8 "PULSE WIDTH COUNT TIMER (PWC)"
This chapter describes the functions and operation of the pulse width count timer (PWC).
CHAPTER 9 "8-BIT SERIAL I/O"
This chapter describes the functions and operation of the 8-bit serial I/O.
CHAPTER 10 "UART"
This chapter describes the functions and operation of the UART.
CHAPTER 11 "EXTERNAL INTERRUPT CIRCUIT (EDGE)"
This chapter describes the functions and operation of the external interrupt circuit.