Track exchange, Execution of track exchange, Model d2424 reference manual (editing tracks) – Fostex D2424 User Manual
Page 72: Flashing
Model D2424 Reference Manual (Editing Tracks)
72
Flashing
Track Exchange
"
Track exchange
" is the function that exchanges tracks -- all real tracks and all additional tracks--
currently in the programs, in mono track units or in multiple track (Stereo pair 2 tracks; 8 track
units) units.
In other words, exchanging tracks in any combination, as shown below, means that data recorded
on those tracks will be relocated. This function enables effective use of tracks. Not only will it be
possible to make exchanges between real tracks but, by dumping a real track to a blank additional
track, another blank real track is created for future recording.
However, since data in this additional track cannot be directly played back in real time, if the data
need to be played back or edited, it must be moved to a real track.
Also, as explained in the previous "Erase," “Track Exchange” is necessary when checking REC END
in the additional track.
Execution of Track Exchange
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
Track 9
Track 10
Track 11
Track 12
Track 13
Track 14
Track 15
Track 16
Track 17
Track 18
Track 19
Track 20
Track 21
Track 22
Track 23
Track 24
Track 51
Track 52
Track 53
Track 54
Track 55
Track 56
Track 57
Track 56
.........................
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
Exchange in 8 track units
Exchange in 2 track (stereo pair) units
Exchange in mono track units
Exchange in 8 track units
1. In the stop mode, press the [EDIT] key to display
"TRK Exch.Mono?" or "TRK Exch.Group?."
Select "
TRK Exch.Group?
" to exchange tracks in 2 track
(stereo pair)/8 track units, and "
TRK Exch.Mono?
" to
exchange in mono track units.
• Exchanging in group units
• Exchanging in mono units
2. After either is displayed, press the [EXECUTE/
YES] key.
The display will change to selecting the tracks for
exchanged.
To actually select the tracks, please refer to the next
page.
Flashing