Setup of input/output balance/unbalance, Flashing – Fostex D2424 User Manual
Page 126
126
Model D2424 Reference Manual (Changing the Initial Setting
Flashing
Setup of input/output Balance/Unbalance (“BAL/UNBAL?” menu)
Whether the D2424 rear panel analog input/output connectors should be set to balanced or unbalanced lines
can be setup at the "Setup of input/output balance/unbalance" menu. Initially, it is set for unbalance but can
be set to balanced input/output.
Because the setup content is registered in the D2424 internal System ROM, it will be held even though the
current drive E-IDE hard disk is replaced.
1.While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
2.Turn the [JOG] dial to select “BAL/UNBAL ?” (“?”
flashes), then press the [EXECUTE/YES] key.
The display will change as shown below and the
presently setup item will be displayed.
The blinking "
?
" will disappear when the [
EXECUTE/YES
]
key is pressed and the lighted item will change to
flashing.
"
UNBAL
" will flash in the initial setting.
• Initial setting:
[UNBAL] (Unbalanced)
• Option:
[UNBAL] (Unbalanced) or [BAL] (Balanced)
* The settings cannot be saved and loaded as part of the song data.
* The settings are maintained after you turn off the power to the recorder.
3. Select the “BAL” or “UNBAL” with the [JOG] dial,
then press the [EXECUTE/YES] key again.
The selected item will be registered and "
?
" in Step-2
will return to flashing.
4. Exit from the SETUP mode by pressing the [EXIT/
NO] key (or [STOP] button).
To cancel the operation, or to restore the setting
obtained prior to the [EXECUTE/YES] key press, press
the [STOP] button or the [EXIT/NO] key. Each time
you press one of these keys, the recorder returns to
the previous hierarchy level of the menu, and finally
exits SETUP mode and displays the previous Time Base.
Setting the input/output balance/unbalanced function
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT