Editing a program title, Press the [execute/yes] key, Press the [execute/yes] key again – Fostex D2424 User Manual
Page 38: Press the [exit/no] key, or [stop] button, Press the [exit/no] key, or the [stop] button
38
Model D2424 Reference Manual (Handling Programs)
1. Press the [SETUP] key while the recorder is
stopped, to put the system in the SETUP mode.
2. Turn the [JOG] dial to select the first hierarchy of
the “Delete PGM ** ?” (deleting a Program) menu.
Alternatively, you can use the [
SHUTTLE
] dial, [
REV
] key,
or [
NEXT
] key.
3. Press the [EXECUTE/YES] key.
The display will change and “
SURE?
” will flash?
This indicates that the system is in the stand-by state to
delete a program that is currently started up.
To cancel the delete operation, press the [EXIT/NO]
key while [SURE ?] is flashing. Each time you press
the button or key, the recorder will return to a higher
level in the hierarchy, and finally exit SETUP mode.
4. Press the [EXECUTE/YES] key again.
When the recorder displays “
Deleting...
” and finishes
deleting the Program, the data of the next Program
number moves in, and its ABS time appears.
5. Press the [EXIT/NO] key, or [STOP] button.
To check the REMAIN time and free space, press the
[DISP SEL] key to display the [REMAIN] indication after
the Program is deleted.
Editing a Program title
You can name the Program as explained in the “Creating a new Program” section. You can also
change the title later by using the [Title Edit ?] menu in SETUP mode.
You can edit the title of the selected Program before you select SETUP mode. You cannot select a Program after the
recorder enters SETUP mode. Be sure to select the desired Program using the steps explained in the “Using the
Program Change function” section.
1. Press the [SETUP] key while the recorder is
stopped, to put the system in the SETUP mode.
2. Turn the [JOG] dial to select the first hierarchy
level of the “Title Edit ?” (“?” flash.) menu.
Flashing
Flashing
Flashing
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
SURE?
3. Press the [EXECUTE/YES] key.
The currently-selected Program title appears with the
left-most character flashing.
4. Move the flashing cursor with the [SHUTTLE] dial
and input the letter or number with the [JOG] dial
/ [NEXT] key / [PREV] key.
Up to 16 digits and the following letters / numbers /
symbols can be input.
5. After you enter the title, press the [EXECUTE/YES]
key.
The new title is confirmed, and the ABS time value of
the Program appears.
6. Press the [EXIT/NO] key, or the [STOP] button.
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
PGM
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
PGM