Fostex D2424 - Manual (Page 57)

Model D2424 Reference Manual (Chain Play function)
57
Chain Play function
“ Chain play ” functions to playback, in any order, the tunes recorded on a multiple number of programs.
There are three modes of chain play and each operates as shown below.
Before executing these modes, “
AUTO RTN START point ” and “ AUTO RTN END point ” must be set for each
program. For details, please read the explanations starting from the next page.
In the pause mode, as shown in the
example on the left, upon reaching the
“
END point ” at playback of program 02 ,
the recorder automatically stops at the
“
START point ” of program 05 which is to
be played back next.
If chain play is executed again at the
stopped point, it will stop again at the
next program
10 “ START point .”
In the auto play mode, as shown in the
example on the left, upon reaching the
“
END point ” of program 02 started in
playback, the recorder will automatically
playback in setup order between the
“
START points - END points ,” and, at the
moment playback is finished at the “ END
point ” of the last program 01 , stops at the
“ START point ” of the first program.
In the repeat mode, playback is repeated
until the above auto play mode is
canceled.
If power is switched off and then switched
on again while set to the Repeat mode,
playback will automatically start from the
first program.
AUTO RTN START point
Playback
Playback
Playback
AUTO RTN START point
AUTO RTN START point
AUTO RTN END point
AUTO RTN END point
AUTO RTN END point
PGM 02
PGM 05
PGM 01
STOP
AUTO RTN START point
Playback
Playback
Playback
AUTO RTN START point
AUTO RTN START point
AUTO RTN END point
AUTO RTN END point
AUTO RTN END point
PGM 02
PGM 05
PGM 01
AUTO RTN START point
Playback
Playback
Playback
AUTO RTN START point
AUTO RTN START point
AUTO RTN END point
AUTO RTN END point
AUTO RTN END point
PGM 02
PGM 05
PGM 01
STOP
STOP
STOP