Setting the midi device number, Setting bar/beat resolution mode, Setting the midi device id – Fostex D2424 User Manual
Page 120: Use the [jog] dial to turn the mode “on” or “off, Press the [execute/yes] key, Flashing
120
Model D2424 Reference Manual (Changing the Initial Setting
Flashing
Setting BAR/BEAT resolution mode
1.While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
2.Turn the [JOG] dial to select “Resolution ?” (“?”
flashes), then press the [EXECUTE/YES] key.
The current BAR/BEAT resolution mode setting appears
on the display.
Pressing the [
EXECUTE/YES
] key turns off the flashing
“
?
” character, and the BAR/BEAT resolution mode setting
flashes. With the initial setting, “
Off
” flashes as shown
below.
3.Use the [JOG] dial to turn the mode “On” or “Off”.
When you turn the [
JOG
] dial clockwise and counter-
clockwise, “
On
” and “
Off
” flash alternately.
Selecting “
On
” turns BAR/BEAT resolution mode on, and
selecting “
Off
” turns BAR/BEAT resolution mode off.
4.Press the [EXECUTE/YES] key.
The selected mode setting is stored, and “
?
” flashes.
To cancel the operation, or to restore the setting
obtained prior to the [EXECUTE/YES] key press, press
the [STOP] button or the [EXIT/NO] key. Each time you
press one of these keys, the recorder returns to the
previous hierarchy level of the menu, and finally exits
SETUP mode and displays the previous Time Base.
Setting the MIDI device number (“Device ID ?” menu)
The “Setting the MIDI device number” menu enables you to set the recorder device ID number required to
control the unit from a sequence software using MMC (MIDI Machine Control) or FEX (Fostex System Exclusive
Message).
The transmit device ID links to this setting. You can set the device ID from “
00
” to “
99
”.
However, if the device ID number of the message the recorder receives is “
7F
”, the recorder will recognizes it
to perform the corresponding operation, regardless of its device ID setting.
• Initial setting:
[00]
• Option:
[00] ~ [99]
* This setting is shared by all Programs in the same disk.
* The settings cannot be saved and loaded as part of the song data.
* The settings are maintained after you turn off the power to the recorder.
Setting the MIDI device ID
1.While the recorder is stopped, press the [SETUP]
key to enter SETUP mode.
2.Turn the [JOG] dial to select “Device ID?” (“?”
flashes), then press the [EXECUTE/YES] key.
The current MIDI device ID number appears on the
display.
Pressing the [
EXECUTE/YES
] key turns off the flashing
“
?
” character, and the MIDI device ID number flashes.
With the initial setting, “
00
” flashes as shown below.
Flashing
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT
∞
42
OL
0
30
24
18
12
9
6
3
kHz
24
FS
BIT
SETUP
24
∞
42
OL
0
30
24
18
12
9
6
3
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
CLOCK
INT