Subject too dark or too bright, Iso-a l64, Iso-a 6400 – OM SYSTEM OM-5 Mirrorless Camera with 12-45mm f/4 PRO Lens (Silver) User Manual
Page 56

You can choose the functions performed by the front and rear dials.
g
You can use the Fn lever to reverse the roles of the front and rear dials. The lever can also be
assigned other roles.
g
You can choose whether the display reflects the effects of exposure compensation or maintains
a constant brightness for ease of viewing. At default settings, the display reflects the effects of
exposure compensation.
g
Depending on the shutter speed selected, you may notice banding in the display caused by flicker
from fluorescent or LED light sources. The camera can be configured to reduce the effects of flicker
during live view or when pictures are taken.
g
“Reducing Flicker in Photographs (Anti-Flicker
,
“Reducing Flicker Under LED Lighting (
Subject Too Dark or Too Bright
If the camera is unable to achieve optimal exposure with [AUTO] selected for [
K
ISO], the ISO
sensitivity display will flash as shown.
Display
Problem/solution
ISO-A
L64
Overexposure.
Choose a higher aperture value or faster shutter speed.
ISO-A
6400
Underexposure.
Choose a lower aperture value or slower shutter speed.
If the warning does not clear from the display, choose a higher value for ISO
sensitivity.
g
“Changing ISO sensitivity (ISO)” (P. 98)
ISO-Auto Set] > [Upper Limit / Default] (P. 284)
56
Choosing aperture and shutter speed (
M
: Manual
Exposure)
B
B
B
B