OM SYSTEM OM-5 Mirrorless Camera with 12-45mm f/4 PRO Lens (Silver) - Manual (Page 446)

Subject with low contrast Excessively bright light in
center of frame
Subjects at different distances Fast-moving subject Subject not inside AF area
If no operations are performed for a set time after the camera has entered sleep mode, the camera
will turn off automatically.
g C Custom Menu s > [Auto Power Off] (P. 296)
The flash is charging
On the monitor, the A mark blinks when charging is in progress. Wait for the blinking to stop, then
press the shutter button.
Unable to focus
The camera cannot focus on subjects that are too close to the camera or that are not suited to
autofocus (the AF confirmation mark will blink in the monitor). Increase the distance to the subject
or focus on a high contrast object at the same distance from the camera as your main subject,
compose the shot, and shoot.
Subjects that are difficult to focus on
It may be difficult to focus with auto focus in the following situations.
AF confirmation mark is blinking.
These subjects are not focused.
AF confirmation mark lights up but the subject is not focused.
Noise reduction is activated
When shooting night scenes, shutter speeds are slower and noise tends to appear in images. The
camera activates the noise-reduction process after shooting at slow shutter speeds. During which,
shooting is not allowed. You can set [Noise Reduct.] to [Off].
g C Custom Menu m > [Noise
Reduct.] (P. 284)
The number of AF targets is reduced
The size and number of available AF targets vary with group target settings ( P. 91 ) and the options
chosen for [Digital Tele-converter] (P. 208) and [Aspect] (P. 138) .
446
Shooting tips and information
-
-