OM SYSTEM OM-5 Mirrorless Camera with 12-45mm f/4 PRO Lens (Silver) User Manual
Page 272
To enable cluster AF targeting when
q
(all targets) is selected and [S-AF], [S-AF
J
],
[C-AF], or [C-AF
J
or [C-AF] is selected for [
n
AF
Mode], select [On2] for [AF Area Pointer]. The
camera will display AF targets for all areas that
are in focus.
B
Option
Description
AF Area Pointer
In autofocus mode, the position of the subject on which the camera has
focused is shown by a green focus target. This item controls the display of
the focus target.
[Off]: The focus target is not displayed.
[On1]: The focus target is displayed only briefly after the camera focuses.
[On2]: After the camera focuses, the focus target will be displayed while the
shutter button is pressed halfway.
Y
Set Home
Choose the home position AF mode, AF target selection mode, and AF target
mode. Press the OK button to select the desired options in the
Y
Set Home
Y
Select
Screen Settings
Choose the roles played by the front and rear dials or arrow pad during AF
target selection (
Y
Loop
Settings
Choose whether AF-target selection “wraps around” the edges of the display.
You can also choose whether you have the option of selecting
q
(all
targets) before AF-target selection “wraps around” to the opposite border of
the display (
Wrap is disabled in movie mode and when [
R
AF] or [
R
AF
J
] is selected
for [
K
AF Mode].
t
Target
Mode Settings
Choose the number of AF targets available and how far the AF target moves
during AF-target selection (
).
K
Orientation
Linked
Y
The camera can be configured to change the AF-target position and AF-
target mode automatically when it detects that it has been rotated between
landscape (“wide”) or portrait (“tall”) orientations (
272
abcd
AF/MF