OM SYSTEM OM-5 Mirrorless Camera with 12-45mm f/4 PRO Lens (Silver) User Manual
Page 135
Use the front dial to select an option.
Still picture (S-IS)
S-IS Off
(Still-I.S. Off)
Image stabilization disabled. Select this option when using a
tripod.
S-IS AUTO
(Auto I.S.)
Image stabilization applies to motion on all axes. If panning
motion is detected, the camera will automatically suspend
image stabilization on that axis.
S-IS
1
(All Direction Shake I.S.)
Image stabilization applies to motion on all axes.
S-IS
2
(Vertical Shake I.S.)
Image stabilization applies to vertical motion. Use when
panning the camera horizontally.
S-IS
3
(Horizontal Shake I.S.)
Image stabilization applies to horizontal motion. Use when
panning the camera vertically.
Movie (M-IS)
M-IS Off
(Movie-I.S. Off)
Image stabilization disabled.
M-IS
1
(All Direction Shake I.S.)
Electronic image stabilization combined with VCM-controlled
image sensor movement.
M-IS
2
(All Direction Shake I.S.)
VCM-controlled image sensor movement only.
Image stabilization may be unable to compensate for excessive camera motion or very slow shutter
speeds. Use a tripod in these cases.
You may notice noise or vibration while image stabilization is in effect.
The setting selected with the lens image stabilization switch, if any, takes priority over that selected
with the camera.
You can choose whether image stabilization will be performed while the shutter button is pressed
halfway.
g
[Half Way Rls With IS] (P. 277)
You can prioritize lens image stabilization.
g
> [Lens I.S. Priority] (P. 277)
135
Reducing camera shake (Image Stabilizer)
3.
C
C
C
B
B