OM SYSTEM OM-5 Mirrorless Camera with 12-45mm f/4 PRO Lens (Silver) - Manual (Page 216)

The camera varies the exposure of each shot. You can select the
bracketing increment from 0.3 EV, 0.7 EV, and 1.0 EV. In single-
frame shooting mode, one photograph is taken each time the
shutter button is pressed all the way down, while in sequential
shooting mode the camera continues to take shots in the following
order while the shutter button is pressed all the way down: no
modification, negative, positive.
ART BKT
ISO BKT
Focus BKT
WB BKT
AE BKT
FL BKT --
--
--
--
A-- G--
3f 1.0EV
Back Set
Bracketing
Off
2f 0.3EV
2f 0.7EV
2f 1.0EV
3f 0.3EV
3f 0.7EV
3f 1.0EV
Varying settings over a series of photographs
(Bracketing)
Bracketing is used to vary shooting settings such as exposure and white balance over a series of shots.
Depending on the setting, you may be able to combine several different forms of bracketing. Use
bracketing if you are unsure what settings to use or lack the time needed to change settings during
shooting. You can also store bracketing settings and later recall them simply by turning bracketing on.
AE BKT (AE bracketing)
Number of shots: Choose from 2, 3, 5, or 7.
A
t icon is displayed in green until all the shots in the bracketing sequence have been taken.
The camera modifies exposure by varying aperture and shutter speed (mode
P
), shutter speed
(mode
A
), aperture (mode
S
), or ISO sensitivity (mode
M
).
If an option other than [AUTO] is selected for [ISO] ( P. 98 , P. 117 ) in mode M , the camera will
instead modify exposure by varying shutter speed.
The camera brackets the value currently selected for exposure compensation.
The size of the bracketing increment changes with the value selected for
[EV Step] in C Custom
Menu m (P. 284) .
Exposure bracketing cannot be combined with FL or focus bracketing.
216
Varying settings over a series of photographs
(Bracketing)
C