OM SYSTEM OM-5 Mirrorless Camera with 12-45mm f/4 PRO Lens (Silver) User Manual
Page 174
Role
Function
I
Face Selection (
Q
)
Select the face used for focus when the camera detects multiple
portrait subjects. Pressing the control selects the face closest to the
current AF target. If
q
(all targets) is selected for AF-target mode,
pressing the button will instead select the face closest to the center
of the frame. To choose a different face, hold the control and rotate
the front or rear dial.
This option can also be used during movie recording.
I
Face Priority (
I
)
Pressing the button when an option other than [Face Priority Off]
is selected for
selects [Face Priority Off];
to restore the previous setting, press the button again. To change the
option displayed in the [
I
Face Priority] menu, hold the button
and rotate the front or rear dial.
Live View Boost (
Z
)
(
K
only)
Pressing the button when [Off] is selected for
selects [On1]. If an option other
than [Off] is selected, pressing the button selects [Off]; to restore
the previous setting, press the button again. To choose an option for
[Live View Boost], hold the button and rotate the front or rear dial.
Focus Ring Lock (
O
)
Press the control once to disable, and again to enable, the lens focus
ring. This option is available when [S-AF
J
], [C-AF
J
], [
J
],
[C-AF+TR
J
], [Pre
J
], or [
R
AF
J
] is selected for [AF Mode].
The
J
portion of the AF mode indicator is displayed gray while the
ring is disabled.
In the case of lenses equipped with an MF (manual focus) clutch,
pressing the button has no effect when the focus ring is in the MF
position (closer to the camera body).
Focus ring lock ends when you perform an operation such as turning
the camera off or attaching a different lens.
Flash Mode (
A
)
(
K
only)
Adjust flash settings (
). Press once to display flash options and
again select the highlighted option and exit. Use the front or rear
dial or
HI
buttons to adjust settings.
This function can be assigned to the
I
and
G
buttons only. You
must first set [
d
] to [Direct Function].
g
Y
(sequential
shooting/self-timer)
(
K
only)
Choose a drive (sequential shooting/self-timer) mode (
). Press
once to display drive mode options and then choose a mode using
the front or rear dial or
HI
buttons.
174
Assigning functions to buttons (Button Function)