OM SYSTEM OM-5 Mirrorless Camera with 12-45mm f/4 PRO Lens (Silver) - Manual (Page 131)

One-touch white balance
Measure white balance by framing a piece of paper or other white object under the lighting that will
be used in the final photograph. Use this option to fine-tune white balance when you find it hard to
obtain the desired results with white balance compensation or preset white balance options such as
A (sunlight) or D (overcast). The camera stores the metered value for quick recall as required.
Select [ J ], [ K ], [ L ], or [ M ] (one-touch white balance 1, 2, 3, or 4).
Photograph a piece of colorless (white or gray) paper.
Frame the piece of paper so that it fills the display. Ensure that it is free of shadows.
In still photography mode, press the INFO button and then the shutter button.
In movie mode, press the INFO button to release the shutter.
The one-touch white balance screen appears.
Highlight [Yes] and press the OK button.
The new value is saved as a preset white balance option.
The new value is stored until one-touch white balance is measured again. Turning the power
off does not erase the data.
131
Adjusting color (WB (white balance))
1.
2.
3.