OM SYSTEM OM-5 Mirrorless Camera with 12-45mm f/4 PRO Lens (Silver) User Manual
Page 171
Role
Function
RAW
X
(RAW quality)
(
K
only)
Switch between RAW + JPEG and JPEG [
KX
] settings. Press the
control to switch from RAW or JPEG to RAW + JPEG or from RAW +
JPEG to JPEG. You can also choose an image quality setting by
holding the button and rotating a dial.
Test Picture (
K
TEST)
(
K
only)
Take a test shot. You can view the effects of selected settings in an
actual photograph. If you keep the control pressed while pressing
the shutter button, you will be able to view the results but the
picture will not be saved to the memory card.
Custom Mode C–Custom
Mode C4 (
C
–
C4
)
(
K
only)
Recall settings for the selected custom mode. Press the control once
to recall saved settings (
), a second time to restore the settings
previously in effect. The control continues to perform this function
when a custom mode is selected with the mode dial.
Exposure
F
(exposure)
Adjust exposure settings. Hold the control and rotate the front or
rear dial. Alternatively, you can press the button to activate settings
and then rotate the dials. The adjustments available vary with the
shooting mode:
[P]: Use the front or rear dial or
HI
buttons for exposure
compensation. Use the
FG
buttons for program shift.
[A]: Use the front or rear dial or
HI
buttons for exposure
compensation. Use the
FG
buttons for aperture.
[S]: Use the front or rear dial or
HI
buttons for exposure
compensation. Use the
FG
buttons for shutter speed.
[M]
1
: Use the rear dial or
FG
button for shutter speed. Use the
front dial or
HI
buttons for aperture.
[B]: Use rear dial or
FG
buttons to switch between bulb/time and
live composite photography. Use the front dial or
HI
buttons for
aperture.
For information on adjusting exposure settings when [AUTO]
is selected for [ISO] (
Digital Tele-converter
(
e
)
Turn the digital teleconverter on or off (
). Press once to zoom in
and again to zoom out.
Keystone Comp. (
P
)
(
K
only)
Press the control to view keystone compensation settings (
).
After adjusting settings, press the control again to exit. To cancel
keystone compensation, press and hold the control.
171
Assigning functions to buttons (Button Function)
1