Movie, Hdmi output – OM SYSTEM OM-5 Mirrorless Camera with 12-45mm f/4 PRO Lens (Silver) User Manual
Page 236
Time Code
Settings
Choose how time codes are recorded in movie mode.
Set [Time Code Mode] to [Drop Frame] to record time codes corrected for
errors with respect to recording time, and to [Non-DF] (no drop frame) to
record uncorrected time codes.
Set [Count Up] to [Rec Run] to run time codes during recording only, and to
[Free Run] to run time codes even while recording is stopped, including when
the camera is turned off.
In [Starting Time], set a starting time for the time code. Set [Current Time]
to set the time code for the current frame to 00. To set to 00:00:00:00, select
[Reset]. You can also set time codes using [Manual Input].
a
View Assist
The display can be adjusted for ease of viewing when a movie-only picture
mode option ([
k
Flat] or [
l
OM-Log400]) is selected. Select [On] to
adjust the display hues for ease of viewing.
Movie
c
Select [Off] to disable audio recording during filming (
n
HDMI Output
Adjust output settings for movies recorded with the camera connected with an external device via
HDMI.
Output Mode
Choose the video output mode. When set to [Monitor Mode], image and
camera information are output. The camera information is not displayed on the
camera screen.
When set to [Record Mode], only image is output. The camera information is
displayed on the camera screen.
Not available when [4K] or [C4K] is selected for
.
REC Bit
If set to [On], the REC trigger is sent from the camera to the connected
external device.
Time Code
If set to [On], the time code is sent from the camera to the connected external
device.
External devices triggered by time codes may stop recording if:
the footage requires extensive processing, or
you switch between the monitor and viewfinder.
236
The Video Menu
C
C
-
-