EastWest Hollywood Orchestra Opus Edition Virtual Instrument Plug-In (Download) - Manual (Page 201)

HOLLYWOOD ORCHESTRA OPUS EDITION C O N T E N T S <
CHAPTER 6: MIX 201 C H A P T E R <
Q Define a broad (0%) or narrow (100%) slope around the specified frequency.
Graphic EQ Display Click anywhere on the Graphic EQ Display to bring up the the Graphic EQ Window.
Output Gain Boost (+24 dB) or attenuate (-60 dB) the audio output gain.
Click in the GRAPHIC EQ DISPLAY to edit EQ parameters in the GRAPHIC EQ WINDOW . Each node
represents 1 of the 6 frequency bands. Click on the nodes to turn them on and off, move
them horizontally to change the frequency, and move them vertically to adjust the gain.
Tone Enhancer
Enhance the low, middle and top end of the frequency spectrum. Use the Focus control
to boost frequencies above 1 khz, and the Fullness control boost lower mids below 1 khz.
Use the Sub Frequency control to define the center frequency between 32 hz and 256
hz, and the Sub Bass control to enhance it.
CONTROLS
Input Gain Boost (+24 dB) or attenuate (-60 dB) the audio input gain.
Sub Bass Boost sub frequencies with a control ranging from 0 - 100%.
Sub Frequency Select a center frequency between 32 hz and 256 hz, that the Sub Bass control will boost.
Fullness Boost lower mid frequencies below 1 khz with a control ranging from 0 - 100%.
Focus Boost frequencies above 1 khz with a control ranging from 0 - 100%.
Compress Apply compression before the final output gain stage.
Output Gain Boost (+24 dB) or attenuate (-60 dB) the audio output gain.