7 midi echo, Midi echo – EastWest Hollywood Orchestra Opus Edition Virtual Instrument Plug-In (Download) User Manual
Page 155

HOLLYWOOD ORCHESTRA OPUS EDITION
<
CHAPTER 4: PLAY
155
<
The
THRESHOLD
CONTROL
determine the Note Velocity or MIDI CC values above which a
note is processed, between values of 0 and 127 (notes below the selected threshold
are not played).
Use the
RATIO
CONTROL
to determine the resulting Note Velocity or MIDI CC values for
those that passed through the Threshold control.
Use the
MAKEUP
CONTROL
to increase or decrease the Note Velocity or MIDI CC values
relative to their original values, between values of -127 and 127. Or, enable the
AUTO MAKEUP
SWITCH
to set this value.
Use the
TARGET MODE
MENU
to select which values the MIDI Compressor should target,
Note Velocities or MIDI CCs.
4.3.7
MIDI Echo
This MIDI Tool creates a delay line with MIDI data, with the ability to change veloc-
ity, tuning and panning over the course of that delay line.
In the
DELAY SYNC
MENU
select a note sub-division: standard sub-divisions (Whole, Half,
1/4, 1/8, 1/16, 1/32, and 1/64), and triplet sub-divisions (1/4 triplet, 1/8 triplet
and 1/16 triplet) are available.
The
DELAY TIME
CONTROL
relates to the Delay Sync control, essentially changes the sub-
division. For instance, a 1/4 Delay Sync value with a Delay Time of 1 equals a 1/8
Delay Sync value with a Delay Time of 2.
The
REPETITIONS
CONTROL
determines how many repeats of the delay lines will play. With
3 repetitions selected, you will hear the original note, plus 3 repeats (for a total of
4 beats).
The
VELOCITY DECAY
CONTROL
will change Note Velocity as a percent of its original value
over the course of the delay line. Use positive values between 100-150% to produce
a crescendo effect, or values between 10-100% to produce decrescendo effect.
The
STOP VELOCITY
CONTROL
pertains to the Velocity Decay control, stopping the output of
velocities below a certain threshold at higher values.
The
TUNE
CONTROL
will change fine tuning over the course of the delay line. With posi-
tive values between 0 and 100 cents, the pitch will bend upward, and with negative
values between -100 and 0 cents, the pitch will bend downward.
The
TRANSPOSE
CONTROL
will incrementally increase or decrease over the course of the
delay line according to the transposition value, that ranges from -12 to +12 semi-
tones. With a value of 1, each delay line repetition will rise by 1 semitone (chro-
matically). Please be aware, if the transposition exceeds the sampled range of the
instrument, nothing will play.