Great Plains DICKEY-john AI100 10-inch Virtual Terminal - Manual (Page 45)

OPERATOR’S MANUAL
10" Virtual Terminal
11001-1440-200701
TASK CONTROLLER / 43
‘AS APPLIED’ TASK
To record rates of the current product being applied in the field, an ‘As
Applied’ task can be created on the Virtual Terminal and saved to the SD
card.
A task file name is a required entry. Customer name, farm, and field entries
are optional and not required to create and run a task.
A Task created on the Virtual Terminal is editable and rates can be adjusted
on the IntelliAg Main Operate screen.
To Create a New Task:
1. From the Task Controller Main screen, press the Add New icon.
2. A new Task file name using the current date as the task name will
automatically populate in the Task field. To create a different Task file
name, press the Task selection box to enable the keypad and enter a
Task name.
3. Press the Checkmark to save the task name without adding additional
customer data or proceed to Customizing a Task.
Figure 35
Adding a Task
NOTE: If a Task has not been started,
the Edit button can be pressed
to edit the task. If a task has
been started, the button will be
hidden.
Add New
icon
Edit icon
Selection Box
brown, joe
south
south40
Start Task button