Great Plains DICKEY-john AI100 10-inch Virtual Terminal - Manual (Page 20)

OPERATOR’S MANUAL
10" Virtual Terminal
11001-1440-200701
18 / VT DISPLAY
ADDITIONAL APPLICATIONS
The Additional Applications screen indicates what applications are enabled
within the Virtual Terminal. When enabled, these functions will appear on
the left side of the Main Work screen and are accessible in the Operate
mode.
An application is enabled (with a checkmark) or disabled (without the
checkmark) by pressing the selection box located in front of the application
name.
NOTE: The GPS Broadcaster must be
enabled for date and time
stamps to appear in the alarm
log.
Figure 14
Additional Applications Screen
APPLICATION DEFINITIONS
TASK CONTROLLER
The Task Controller feature provides task management of data compiled
from all active implements. Job data is transferred to an implement for
variable rate control and collected from an implement for data logging.
GLOBAL POSITIONING SYSTEM
The GPS feature receives GPS position data from an external GPS receiver
and communicates position to the Task Controller and the rest of the
system.
IMPORTANT: The GPS function is a required enabled application to
communicate with the Task Controller unless a
CAN-based GPS receiver is used. If a CAN-based GPS is
used, the NMEA2000 GPS Broadcaster option should be
disabled to avoid potential communication conflicts.
GPS Bridge
Task Controller
Can Bus Logger
Applications button