Great Plains DICKEY-john AI100 10-inch Virtual Terminal - Manual (Page 18)

OPERATOR’S MANUAL
10" Virtual Terminal
11001-1440-200701
16 / VT DISPLAY
NOTE: For Virtual Terminals, other
than DICKEY-john, refer to the
manufacturer’s VT operator’s
manual for auxiliary
assignment.
To Assign the Master Switch to the IntelliAg:
1. Press the Auxiliary Assignment button.
2. At the Function box, use the right or left arrows to select the desired
function (Control Channel icon).
3. At the Input box, use the right or left arrows to select the desired input
(Tractor ECU Master Switch).
4. Press the Enter button to accept.
No Auxiliary Inputs Available appears on the screen if the Tractor ECU is
not connected. When assigned, this line will disappear.
No Auxiliary Functions Available appears on the screen if the IntelliAg
system is not connected. When assigned, this line will disappear.
Enter button