Great Plains DICKEY-john AI100 10-inch Virtual Terminal - Manual (Page 39)

OPERATOR’S MANUAL
10" Virtual Terminal
11001-1440-200701
TASK CONTROLLER / 37
NOTE: A 2GB or smaller SD card
should only be used.
Figure 29
Data Card Not Writeable
IMPORTANT: It is important to ALWAYS press the SD Card Eject
button before removing the card. Removing the SD card
without ejecting can potentially lose logged data.
FARM MANAGEMENT SOFTWARE
Operations data and single or variable rate maps created with farm
management software through a PC can be saved to an SD card and
transferred to the Virtual Terminal. The data will load into the respective
Task Controller fields for selection when creating a task.
Data stored on an SD card can also be transferred to a PC and utilized to
create reports using a farm management software program. DICKEY-john
recommends and offers Farm Works® software, a mapping and field
documentation application. Technical support issues should be directed to
Farm Works® for troubleshooting assistance.
SD
< 2 GB
SD Card Eject button