Festo Контроллер позиционирования CPX-CMAX - Manual (Page 304)

6. Parametrisation
6−14
Festo P.BE−CPX−CMA X−CONTROL−EN en 0908NH
6.3.2 Startup parameter
The module parameters 0 ... 5 are not used and not transĆ
mitted.
The module configuration (byte 6 + 7) is transmitted from the
master to CPX by means of startup parametrising. The paraĆ
meters are reserved and described in the GSD file.
Both bytes are currently not yet used and reserved for future
functions.
The data format of the module is specified via the Data forĆ
mat analogue value" parameter in CPX, provided it is supĆ
ported by the CPX node (see section 1.2).
Standard module parameter (byte 0 to 5)
The standard module parameters in byte 0 ... 5 are not used
by the CMAX.
Module configuration (byte 6 and 7)
Module configuration 1 and 2
Byte Bit Name Description
6 0 ... 7 Module configuration 1 =: 0 ! (reserved)
7 0 ... 7 Module configuration 2 =: 0 ! (reserved)