Patton electronic FORESIGHT 6300 - Manual (Page 65)

Configuring Cards 65
FS6300 NMS User Manual 4 • Configuring and Managing Devices
Viewing/Modifying System Log Configuration
Select System Log from the card’s configuration menu to view and modify syslog information. If you only
want to view the syslog configuration, click on View SystemLog Configuration in the System Log window. To
configure the syslog information, click on Modify SystemLog Configuration in the menu tree in the Syslog
window.
Figure 55. Modify System Log
Changing Alarm Status
To change the alarm status of a card:
Note There must only be one card on the entire chassis that is configured for
alarm card monitoring.
1. Click on System Card Information in the System Log window.
Figure 56. Set System Card Alarm Status
2. Select an option for the card from the Alarm Card Polling Mode drop-down menu.
3. Click Submit.