Scheduling rediscovery, Regular interval, Schedule re-discovery for regular intervals – Patton electronic FORESIGHT 6300 User Manual
Page 39

Scheduling Rediscovery
39
FS6300 NMS User Manual
2 • Discovering Your Network
Scheduling Rediscovery
You can configure and schedule how often the network goes through the re-discovery process. The rediscovery
process can also be configured to run at a specific hour on a specified date of the month or specified day of the
week.
You can set the Rediscovery Interval using one of the following options:
•
•
•
Regular Interval
To schedule re-discovery for a regular interval (for example, every 24 hours):
1. Click on Tools > Discovery Administration at the top of the screen. Then, click on Discover Patton
Devices in the menu tree of the Discovery window.
2. Click on the General tab, then click the Rediscovery button. The Rediscovery Scheduler window opens.
Figure 24. Schedule Re-Discovery for Regular Intervals
3. Select the Regular Interval radio button at the top of the window.
4. Specify the rediscovery interval in Hours, Minutes, and Seconds. By default, the interval is set as 24 hours.
You can set any value from 1 to 24 in the hours field.
5. Click OK.