Configuring cards, Viewing events and alerts, Card events and alerts – Patton electronic FORESIGHT 6300 User Manual
Page 62

Configuring Cards
62
FS6300 NMS User Manual
4 • Configuring and Managing Devices
Configuring Cards
See the following chapters for detailed information on configuring specific cards:
•
2616RC – Chapter 5,
•
3096RC – Chapter 6,
•
3196RC – Chapter 7,
•
6511RC – Chapter 8,
Note
Although this guide supplies basic information for configuring cards in the
FS6300 NMS, you may also want to refer to the card’s Administrator’s Refer-
ence Guide and User Manual for more detailed information on installing and
configuring the card.
The following sections include procedures that are the same for all cards:
•
•
•
•
“Viewing/Modifying System Log Configuration”
•
•
“Viewing/Modifying System Log Configuration”
Viewing Events and Alerts
Events are occurrences in the network, such as the discovery of an element, status update of an element, or a
filure of an element. Alarms/Alerts are a result of events in the network and they represent failures that require
immediate attention.
To view a color-coded chart that shows the amount of alarms and severity of alarms for the card, select Events
and Alerts from the card’s configuration menu.
Figure 50. Card Events and Alerts