Socket Mobile Bluetooth iPAQ - Manual (Page 68)

68
6 | S
ETUP FOR
P
ALM
OS
This chapter explains how to install and use the
Bluetooth Cordless Hand Scanner (Bluetooth CHS) with a
Bluetooth enabled device running Palm OS 5.2 or later.
Before you begin the instructions in this chapter, make
sure you have installed the batteries (and tether, if
desired), and charged the scanner, as described in
Chapter 2, “Hardware Setup.”
Setup Summary
STEP 1: Uninstall other scanning software.
STEP 2: Install SocketScan software.
STEP 3: Turn on the Bluetooth CHS.
STEP 4: Start SocketScan
STEP 5: Connect PDA to Bluetooth CHS.
STEP 6: Open your application.
STEP 7: Scan data into your application.
Application Features
Scanner settings
Symbology Selector
Scan Test
For help using SocketScan, tap on the button on the top of any
screen.