Socket Mobile Bluetooth iPAQ - Manual (Page 38)

38
STEP 3: E NABLE C ORDLESS S CANNER S UPPORT
1. Go to the Today screen by tapping Start | Today.
2. Tap the SocketScan icon at the bottom of the screen. In the pop-up
menu, tap Settings.
3. The Scanner Settings utility will appear. Tap on the CS tab at the bottom.
4. Check the box Enable Cordless Scanner support. IMPORTANT!!!
5. Tap ok to save the changes.
Notes:
• If the SoMo’s Bluetooth radio is off, a message may report that ActivePairing
is not activated. Tap ok.
• After Cordless Scanner Support is enabled, the SocketScan icon will have a
blue circle.