Socket Mobile Bluetooth iPAQ User Manual
Page 57
CHAPTER 5: SETUP FOR WINDOWS MOBILE
57
3. Connect!Agent will turn on the Bluetooth radio and begin to search for
and connect to the Bluetooth CHS.
-
If this is your first time connecting to a Bluetooth CHS from this
device, Connect!Agent will search for any Bluetooth CHS in range.
-
If you have previously connected to a Bluetooth CHS, Connect!Agent
will automatically search for your favorite (default) device.
4. Tap to select your scanner and tap ok. The scanner will appear as Socket
CHS [xxxxxx], where the characters in brackets are the last 6 characters
of the Bluetooth Device Address.
Note: To help you identify the scanner, Connect!Agent reports the
Bluetooth Device Address, which is printed on a label inside the battery
compartment for the Bluetooth CHS v2.