Socket Mobile Bluetooth iPAQ User Manual

Page 24

4. More fields will appear. Enter the following settings:

IMPORTANT!

• SCENARIO 1 OR 2

Enable ActivePairing – Do not check the box
Port – Select the appropriate COM number for your Bluetooth stack:

i. Microsoft: Outgoing COM number

ii. Toshiba: Local COM-Client

iii. Broadcom: COM for Client Applications

• SCENARIO 3

Enable ActivePairing – Check the box
Port – Select the appropriate COM number for your Bluetooth stack:

i. Microsoft: Incoming COM number

ii. Toshiba: Local COM-Server

iii. Broadcom: COM for Local Services

The remaining fields are optional for any of the scenarios:

• Good read indication on CS: Select how you would like the

Bluetooth CHS to indicate that it has successfully read data.

• Auto re-connect: Select the maximum number of attempts and time

limit per attempt for the Bluetooth CHS to reconnect to the computer
in case they move out of range from each other.

• Disable CS Auto Power Off mode:

CAUTION: Selecting this option will disable the Auto Power Off
mode and can result in complete discharge of the Bluetooth CHS
batteries. Use with caution.

Note: You must disable CS Auto Power Off mode if you would like the
scanner to automatically reconnect to the PC after losing a connection.

• Advanced: When the PC is connected to the scanner, you can modify

the scanner’s Bluetooth friendly name and security settings. Please refer
to the instructions later in this chapter.

• Battery Level: Progress bar appears when the scanner is connected.

5. After entering settings, click OK to save the changes.