Socket Mobile Bluetooth iPAQ - Manual (Page 100)

100 | APPENDIX F RESTORING FACTORY DEFAULTS
A
PPENDIX
E
R
ESTORING
F
ACTORY
D
EFAULTS
This procedure is for the Bluetooth CHS v2 only.
To restore the Bluetooth CHS to its factory defaults, do the following:
1. Turn on the Bluetooth CHS. Make sure the Bluetooth CHS does not have a
Bluetooth connection.
2. While pressing the trigger button, briefly press and release the power button.
3. Wait 15 seconds or until you hear a single beep.
4. Release the trigger button. If you performed the actions correctly, multiple beeps
will sound, and the Bluetooth CHS will power off.
5. The next time you power on the Bluetooth CHS, it will reset the Bluetooth CHS to
its factory default settings.