Socket Mobile Bluetooth iPAQ - Manual (Page 33)

CHAPTER 3: SETUP FOR WINDOWS XP, VISTA, AND 7 33
• Security: If enabled, the default security PIN code is 1234 . A new 4 digit
PIN can be entered, but you must enter it manually for each connection.
The PIN is used to authenticate the device to the host every time it
connects.
If desired, click Delete Bonding to delete any bonding/pairing
information. After making any changes, click OK.
• Remote Acknowledgement: Select how you would like the Bluetooth
CHS to indicate that the host PC has successfully received scanned data.
• Trigger Lockout: Select how long you would like the Bluetooth CHS to
disable the trigger until the host PC acknowledges the previous scan.
• Permanent Pair: Enable this option if you want the scanner to
automatically connect to the currently connected computer whenever the
scanner is powered on (Scenario 2). Click OK.
6. If you modified any advanced settings, you will be prompted to power the
scanner off and on to make the changes take effect. Click OK. Turn the
Bluetooth CHS off and back on again.
7. In CS Advanced Settings screen, click Close. In SocketScan Settings, click OK.