Socket Mobile Bluetooth iPAQ - Manual (Page 61)

CHAPTER 5: SETUP FOR WINDOWS MOBILE 61
D ISCONNECTING
To disconnect, tap on the SocketScan icon at the bottom of the Today screen
and tap Disconnect.
Your mobile device will disconnect from the Bluetooth CHS, and for some
mobile devices, Connect!Agent will automatically turn off the Bluetooth
radio of the mobile device, depending on the device’s Bluetooth stack. The
Bluetooth CHS will also beep twice (same tone) to indicate the
disconnection.
Turning off the Bluetooth CHS
To turn off the Bluetooth CHS, press and hold the power button at least 3
seconds, until the blue LED turns off and the Bluetooth CHS beeps twice
(high - low).