Socket Mobile Bluetooth iPAQ - Manual (Page 44)

44
D ISCONNECTING
To manually disconnect, tap on the SocketScan icon at the bottom of the
Today screen and tap Disconnect. The CHS will beep twice (same tone) to
indicate that the connection has ended.
Note:
• To turn off the Bluetooth radio, press the right side button to access the wireless
manager.
• If using ActivePairing, disconnect by turning off the Bluetooth CHS.
Turning off the Bluetooth CHS
To power off the scanner, press and hold the power button at least 3
seconds, until the blue LED turns off and the scanner beeps twice (high -
low).