Step 1: check software versions, Step 2: start socketscan, Step – Socket Mobile Bluetooth iPAQ User Manual
Page 37
CHAPTER 4: SETUP FOR THE SOMO 650
37
STEP
1:
C
HECK
S
OFTWARE
V
ERSIONS
Note: This step is required only if you want to set up your SoMo for ActivePairing
(Scenario 2 or 3).
SOCKETSCAN:
Tap on the SocketScan task tray icon. In the pop-up menu, tap About.
SocketScan versions 7.4.2.0 and later support ActivePairing.
CONNECT!AGENT:
Tap Start | Settings | System Tab | Connect!Agent. In the Connect!Agent
utility, tap About. Connect!Agent versions 1.3.xx and later support
ActivePairing.
If you need to upgrade, you can download the latest software free from
ADVANCED USERS: Refer to the README file for CAB installation instructions.
STEP
2:
S
TART
S
OCKET
S
CAN
1. Tap Start | Programs | SocketScan folder | SocketScan.
2. When SocketScan is running a SocketScan icon will appear at the bottom
of the Today screen.
Icon Meaning
(red circle)
SocketScan is not ready to connect to the
Bluetooth CHS
(blue circle)
SocketScan is ready to connect to the Bluetooth
CHS
Bluetooth CHS is connected and ready to scan