HP 5300 User Manual
Page 162
Index
HP Smart Array 5300 Controller User Guide
Index-9
HP CONFIDENTIAL
Writer: Jennifer Hayward File Name: x-index
Codename: SilverHammer Part Number: 135606-005 Last Saved On: 10/8/02 11:29 AM
Insight Manager 1-10
Options ROMPaq 5-1
ORCA 6-3, 7-1
POST G-1
RBSU 6-1
System Configuration Utility 5-6
System ROMPaq 4-1
restrictions on
ACU use 7-2
controller port use 3-6
CPQONLIN use 7-2
hard drive types supported E-1
moving drives E-9
number of controllers per system H-1
number of hard drives per port C-1
number of hard drives per system H-1
ORCA use 7-2
replacing a Smart controller 3-4
spare drive capacity 7-18
ROM
options, updating 5-1
Recovery 1-10
system, updating 4-1
ROM-Based Setup Utility (RBSU) 6-1
ROMPaq
Options ROMPaq 5-1
System ROMPaq 4-1
S
S.M.A.R.T. support 1-4, 1-9
SAN Access Module, support for 1-4
SCSI
cable connectors, illustrated 3-5
Low Voltage Differential (LVD) 1-8
ports, on board, illustrated 1-2
standards supported 1-8
SCSI bus
termination of C-1, E-1
transfer rate of C-1
SCSI CD-ROM drives, support for H-1
SCSI devices, compatibility of 1-8
SCSI IDs, setting 3-3, H-2
SCSI ports
location of, illustrated 1-2
restrictions on use of 1-2, 3-6
SCSI tape drives, support for 1-4, H-1
SCSI termination requirement 3-4
SCU (System Configuration Utility) 5-6
SE (Single Ended), compatibility of, with
sector repair, dynamic 1-9
series number for regulatory
compliance A-1
size of cache 1-6
SmartStart CD
sources of 4-1
updating option firmware using 5-3
updating system firmware using 4-1
SoftPaq file
location of 4-1
Options ROMPaq diskettes from 5-4
System ROMPaq diskette from 4-2
spare drives
adding to array, using ACU 7-18
adding to array, using CPQONLIN 7-32
adding to array, using ORCA 7-3
defined D-5
multiple, per array 7-18
required capacity of 7-18
sharing among arrays 7-18
support for 1-4
SSD (support software diskette) See
Support Pack
static-safe containers B-1
status LEDs, on drives E-2
storage capacity, expanding
using ACU 7-20
using CPQONLIN 7-34
StorageWorks Enclosure 4300, connecting
to H-3
stripe size
changing, caution for 7-12
default value of 7-13
migration of, in ACU 7-25
migration of, in CPQONLIN 7-35