Hughes SATELLITE HN9000 - Manual (Page 99)

Typical values for Terminal Status parameters
The following table lists typical values and the range of values for parameters on the Terminal
Status page. This information may help you understand the values displayed by a customer's
satellite modem.
To see the definition of any parameter, click the parameter name on the screen.
The Dial Backup Status parameter and Dial Backup Status category of parameters do not apply
to the HN9000 satellite modem.
Table 15: Terminal Status parameters – typical values and range
Range of values Typical values Parameter
Overall Status (parameter category)
Up
Up LAN Interface Status
Down
Out of Service
Maintenance
Unknown
Disabled
Disabled Dial Backup Status
Connected
Connecting: ...
Disconnecting: ...
Disconnected: ...
Enabled
Enabled TCP Acceleration Status
Disabled
Enabled
Enabled Turbo Page Status
Disabled
Disabled
Disabled SSL Acceleration Status
Connected to Server
Connecting to Server
Disconnected from Server
Enabled
Enabled DNS Acceleration Status
Disabled
Transport Interface Receive Statistics
Any whole number 0 Data Messages Received
Any whole number 0 Messages Dropped: Protocol Error
83
HN9000 Satellite Modem Installation Guide
1037576-0001 Revision E
Chapter 9 System Control Center