Hughes SATELLITE HN9000 - Manual (Page 80)

Printing the System Information page
Help the customer print a copy of the System Control Center's System Information page, which
contains important information about the status of the satellite modem. Explain to the user that
they will need the information on this page if they ever contact Hughes Customer Care at a time
when they cannot access the System Information page.
1. Show the customer how to open the System Control Center home page.
If you need instructions, see
Accessing the System Control Center on page 66.
2. Tell the customer to click the System Info link to open the System Information Page.
3. Tell the customer to click the Print this page link near the center of the screen.
The page should print. Tell the customer to keep it in a safe place.
Note: If the you cannot print the page, you can capture the screen image by pressing
Alt+PrintScreen. Paste the captured image into a word processing document or image
editor program and then save the image in a file.
Creating a shortcut to the System Control Center
Create a desktop shortcut to the System Control Center home page on the customer’s computer.
If you need instructions for this, see
Creating a shortcut to the System Control Center on page
66.
Installation and activation complete
At this point installation and activation of the satellite modem are complete. The remaining
information in this manual is provided for reference or troubleshooting purposes. You may or
may not need it.
Once the satellite modem is installed and activated, the customer may connect a router in the
path using the IP information shown in
Figure 36: Welcome screen on page 57.
HN9000 Satellite Modem Installation Guide
64
1037576-0001 Revision E
Completing the installation Chapter 8