Hughes SATELLITE HN9000 - Manual (Page 89)

Red flag indicator
On the status and information screens, a red flag next to a value indicates a problem related to
the parameter listed in the same row where the flagged value appears. The flagged value appears
in the right column; the parameter appears in the middle column. The value indicates the current
state of the parameter.
Figure 49: Red flag problem indicator
The red flag may help you identify and troubleshoot a problem.
If you see a red flag, click the parameter name. The pop-up window that appears may include
troubleshooting information. For detailed troubleshooting information concerning red flag
indicators, see:
• Red flags on System Status page on page 76
• Red flags on Reception Information page on page 78
• Red flags on Transmission Information page on page 81
In these three sections you can find the probable cause and possible solution for a red flag next
to a specific parameter.
System Status page
The System Status page displays important information about the satellite modem’s operational
status.
Available system status values may vary, depending on how the satellite modem is configured.
Therefore, some options shown in
Figure 50: System Status page on page 74 may not appear
on your System Status screen.
73
HN9000 Satellite Modem Installation Guide
1037576-0001 Revision E
Chapter 9 System Control Center