Figure 66: network connections – windows vista, Figure 66: network connections – windows, Vista – Hughes SATELLITE HN9000 User Manual
Page 126

Figure 66: Network connections – Windows Vista
Note: If a red X appears next to the Local Area Connection icon, check your
connections. You cannot successfully configure your system if the red X is present.
2.
Right-click the Local Area Connection-NIC Card icon, which represents the satellite modem
network connection, and select Properties.
The Local Area Connection-NIC Card Properties dialog appears as shown in
Local Area Connection Properties – Windows Vista
on page 110.
Note: Depending on the computer's security settings, a pop-up User Account Control
message may appear, requesting that you confirm the action before proceeding. If you
see this message, click Continue to proceed.
Figure 67: Local Area Connection Properties – Windows Vista
3.
Ensure that both Client for Microsoft Networks and Internet Protocol (TCP/IP) are installed
and checked as shown.
4.
If NetBEUI is installed and checked, uncheck it or uninstall it.
HN9000 Satellite Modem Installation Guide
110
1037576-0001 Revision E
Computer settings
Appendix A